Skip navigation
936 Views 1 Reply Latest reply: Dec 21, 2011 12:39 PM by NickMihelich RSS
DanielSantos Bronze 21 posts since
Sep 10, 2010
Currently Being Moderated

Dec 21, 2011 10:31 AM

Trochoidal Turning in Pro/NC - Creo Elements/Pro 5.0

After some months investigating solutions I learned a lot about other CAM systems and how they do things. I also learned some nasty marketing tactics employed by CAx vendors and that sometimes the things are wrapped with a nice cover but in the core they are all alike.

 

That being said, I created a small video showing Creo Elements/Pro 5 profile turning toolpaths applied in a complex groove so that you can get the so called "Trochoidal Turning" effect such as shown in Unigraphics NX and Sandvik video. Please check this out at Sandvik website:

 

http://www.myyellowcoat.com/solutions-machining/cam-programming/trochoidal-tu...

 

http://qstream-wm.qbrick.com/01247/tooling/Sandvik_Coromant/Turning/Trochoida...

 

This video shows how to make this in Pro/NC or Creo Elements/Pro. It can be done in all Pro/NC versions as well. "Trochoidal Turning" in Siemens NX is NOT a dedicated toolpath as it seems but rather a series of profiles offseted with reversed lead in / lead out moves / cut directions.

 

Not being able to upload it here... get an error... so watch it here:

 

http://youtu.be/FPERyMN54g0?hd=1

 

 

Enjoy it!

 

Daniel

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 3 points
  • Helpful Answers - 1 points