Skip navigation
0

Short video tutorial with PTC Creo Parametric 3.0: How to create an assembly and a component constraint with base placement

Regards,

Vladimir

0

Short video tutorial where you can find a few steps for dynamic influences such as Friction and Liftoff

 

 

Here you can find final example: https://grabcad.com/library/almost-infinite-1

 

Regards,

Vladimir

4

... I would like to Thank you for the really nice year 2013 and I wish you Merry Christmas And Happy New Year 2014

PF2014.jpg

Regards,

Vladimir

0

Do you like rendering? Do you want to create and use your custom HDRI library? It is very dificult to find some HDR files on internet?  Here is the answer: create your custom HDRI library from any pictures and use it for your Rendering in any CAD software - for example PTC Creo Parametric

 

Here is the short tutorial for you: How to create custom HDRI library from any picture for Rendering of your CAD design

 

hdr_library.png

 

Note: ... here you can find Night sky hdri library

 

night_sky_hdri-library.png

 

Regards,

Vladimir

2

Creo rendering ... in 10 minutes with PTC Creo Advanced Rendering Extension - it easy create nice pictures with Creo ARX

 

 

Music by: 2FF Project (Trnava, Slovakia)

 

Final Rendering:

 

4K_nut.jpg

 

Regards,

Vladimir

0

Do you need to set diferent setting for your Creo Parametric session (ProENGINEER)?

You can crerate custom Shortcuts and customize your session

 

(Create and Use the Trail file and All settings / Key sequences are used with program start)

 

Regards, Vladimir

0

... if you like it, do not forget on "LIKE button"

 

 

How to use the gear? It is easy:

 

  • for your engineering design

planetary_gearbox.jpg

  • for fun

halloween_cat.jpg

 

Vladimir

0

How to apply colors

Posted by VladimirPalffy Nov 26, 2012

Do you want to know: How to apply colors for 3D model? ... see the video tutorial:

 

0

If you need to create a Wire or Cable you can use a lot of nice features with Creo Parametric 2.0 (Sweep, Curve from equation, Intersect etc.)

Here you can find some examples:

 

cable.jpg

Download file: cable.prt.1

 

curve_from_equation..jpg

Download file: curve_from_equation.prt.1

 

coil.jpg

Download file: coil.prt.1

0

I have prepared for you short video, where you can see how you can manage your tolerance for your models and drawings:

 

0

... a few steps for quick video tutorial

 

0

SMARTXHatch is the fast solution for updating hatching information in your Pro/ENGINEER and Creo Elements/Pro drawings. Using rules and parameters, the software will update the section presentations in a selected view.

In the video you can see improvements to the software by using Pro/Engineer restricted parameters (predefined value of parameters).

 

0

How to do it? Create custom UDF (User-Defined Feature) in old version (Pro/ENGINEER Wildfire) and use it in new version (Creo Parametric) - it is easy

 

 

Note: see UDF's in attachment

0

The input parameters:

SPACING (required hole spacing)

MINIMUM_OFFSET (minimum distance from the edge/boundary)

LENGTH (total length)

 

The output parameters:

NUMBER_OF_MEMBERS (number of members in Pattern feature)

OFFSET (real offset from the edge/boundary)

 

Write into Relations: Tools>Relations...

 

NUMBER_OF_MEMBERS=(floor(abs(LENGTH-(MINIMUM_OFFSET*2))/SPACING))+1

OFFSET=abs((LENGTH-((NUMBER_OF_MEMBERS-1)*SPACING))/2)

 

Here is the short tutorial:

 

0

Do you need transform Real Number Parameter to String Parameter?

 

It is easy with Relations:

The input parameter: RN=1.234 (Real Number)

The output parameter: STR=1.234 (String)

 

Write into Relations: Tools>Relations...

 

STR=itos(floor(RN))+"."+itos((RN*1000)-(floor(RN)*1000))

 

Transcript of real numbers to string.png

1 2 3 Previous Next